- Overview
- Product Description
- Product Parameters
- Company Profile
- FAQ
Basic Info.
Product Description
The Stone Base Of The Shower Room Is Installed Under The Shower Room, With A General Width Of About 10 Cm And A Height Of 6-8 Cm. In This Way, A Layout That Separates The Inside And The Outside Is Formed, So That The Water In The Shower Room Cannot Flow Outside. At Present, Most People Are Using The New Energy Imitation Marble Stone Base Of The New Energy Stone Base, Which Is More Environmentally Friendly And Pollution-Free.
The Stone Base Is Made Of Gel Coat, Unsaturated Polyester Resin, Ore Powder, Catalyst And Other Materials Through Mold Casting. The Stone Base Can Be Pre-Buried Or Directly Paved With Glass Glue To Seal The Tile Surface.The Stone-Based Gel Coat Has A Thickness Of 0.6-0.8Mm, Uniform Coverage, Good Gloss, Extremely Low Water Absorption, And Anti-Leakage. The Gel Coat And The Stone-Based Surface Are Firmly Bonded, Easy To Clean, Strong In Thermal Shock Resistance, And Long In Service Life.
Shower Room Stone Foundation Installation - Shower Room Stone Foundation Installation Method
If You Want To Be Completely Waterproof, It Is Best To Use The Bottom Basin, The Price Is Higher, But It Is Very Beautiful And High-End. If The Stone Base Is Used, The Stone Base Must Be Pre-Embedded In The Tile Or Floor To Make It Waterproof. If The Floor Tiles Have Been Pasted And The Stone Base Is Used, Then It Needs To Be Sealed With Glass Glue. The Disadvantage: The Glass Glue Will Turn Black After About 3 Years, And The Waterproof Effect Will Not Be So Good, So It Needs To Be Repainted . In Addition, If The Stone Base Is Pre-Embedded In The Tiles, Although The Waterproof Effect Is Better, It Will Be More Troublesome To Change To Other Styles In The Future.
The Main Function
1. The Main Purpose Of The Stone Foundation Is To Play The Role Of Retaining Water. A Good Stone Foundation Must Be Selected For The Stone Foundation. After A Bad Stone Foundation Has Been Used For 1-2 Years And Is Broken, It Is Very Troublesome To Reinstall It, And It Must Be Dismantled First. In The Shower Room, Install The Stone Base Again. If The Reinstallation Is Not Done Properly, It May Cause Screw Holes On The Wall, Which Is Very Ugly.
2. At The Same Time, It Is Easier To Identify The Quality Of The Stone Base. First, Look At The Brightness Of The Surface. There Is No Doubt That The Brighter The Stone Base, The Better The Quality; Secondly, There Is A Layer Of Gel Coat On The Surface Of The Stone Base, Which Is Beautiful And Protects The Stone Base. The Role Of The Main Body, Good Stone-Based Gel Coat Is Relatively Thick, Relatively, Poor Stone-Based Gel Coat Is Relatively Thin; Finally, Look At The Cut Surface, Good Stone-Based Cut Surface Has No Obvious Pinholes, Trachoma, Bubbles, Bright Color, Poor The Stone Base Has Obvious Trachoma, Air Bubbles, And Dull Color.